1. Log in to the teacher table computer.

(If you are logged in or if you do not see the pop-up as shown below, please refer to *.)

2. Select "Speaker Out" in the output device selection that appears.

3. Select "Line Input" in the input device selection that appears.

4. If there is audio output from the microphone, you are done.

 *If you are unable to log in or the pop-up does not appear, unplug the terminal on the PC itself.

　 （The order of removal and connection is output device pins and input device pins.）
　Then, follow the steps from 2.　

There are two main ways to switch between writing on the board and video.

1．How to use the gallery view

First, click the display on the upper right and select the gallery view.

Then there is a blue square in the upper right part of the gallery view.

If you click on this, you can see the display that the pin is pointed.

When you point to the pin, it will be in the following state.

Finally, you can switch the size of the video screen and the shared board writing screen by adjusting the bar in the middle.

２.How to use swap

First, click View and select Standard.

Next, point to the pin for the camera you want to see. At this time, since the active speaker display is small at first, select the grid view and point the pin at the camera from there.

Finally, select View in the upper right and Swap Video and Sharing screen.

How to access the shared folder on iOS.

※Can be used with iOS 13 and above.

1. Open "File App"
2. Tap "<File" at the top left of the screen
3. Tap "Inside ○ ..." at the top of the menu that appears
4. Select "Connect to Server"
5. Enter the name of the server to connect to

Toyosu Campus Courses            　 smb://yshare.sic.shibaura-it.ac.jp
Omiya Campus Courses                  smb://oshare.sic.shibaura-it.ac.jp

6. Tap "Registered User", enter the following, and then tap "Next".
　Name: Academic ID
　Password: Same as Scomb

7. Connected
　　Open "Share Folders"

How to access MyVolume on iOS

*It can be used with iOS13 or later versions.

0.Access the AMI and check (copy) your MyVolume server.
1.Open "File App".
2.Tap "<File>" in the upper left corner of the screen.
3.Tap  button at the top of the menu that appears.
4.Select "Connect to Server".
5.Enter the name of the server to connect to.（Paste the server name you copied.）
6.Tap "Registered Users", enter the following information, and then tap "Next".
　name：SIC ID
　password：Same as Scomb

7.Connected

If you're having trouble with the Teams app on your office support device, try the following.
In addition, the application version has a large cache and causes problems. We recommend the web app version.

What to do if your Teams app isn't working.pdf

• Notifications are not updated, files cannot be attached
• Even if Teams starts, it ends with an error

【① How to clear Teams cache】（If the problem is not resolved by ①, go to ②）

• Delete or rename the teams folder under "\ AppData \ Roaming", which starts with "C: \ Users \ i"

【②How to uninstall and install Teams apps】

1. Uninstall
   Delete or rename the "\ AppData \ Local \ Microsoft \ teams" folder starting with "C: \ Users \ i"
2. Install
   Run "C: \ Program Files (x86) \ Teams Installer \ teams.exe"