Home  >  Service  >  Printing  >  Printing machine  >  Install Kyocera TASKalfa 5052ci Driver for Windows11

Install Kyocera TASKalfa 5052ci Driver for Windows11

2022/03/03

 

Target Parsons Students and faculties
Cautions
  • Please install the Site Licensed Software at your own risk.
  • The Center for Science Information does not do any corrections due to problems with computer installation and does not perform installation.
  • When you install this driver, you need manager authority on PC.

 

１．Click here  --> (Here)※Links are subject to change without notice.

２．Choose your PC's OS.

３．Click "KY Driver(32bit/64bit)" in【Recomended Driver】.

４．Click "Apply" button and the driver file is downloded in download folder on your PC.

５．After downloading the file, click Extract all...

６．Choose "Settings"  (Red Arrow)from start menu.

 

７．Click "Devices" (Red Arrow).

 

８．Click  "Add device"  which is said "Add new printer or scanner".(Red Arrow)

 

９．Choose "Add printer with IP address or host name" and click "next".

 

１０．Enter "host name or IP address(A)" and "port name(P)" and click "next".

spl3.sic.shibaura-it.ac.jp
spl3.sic.shibaura-it.ac.jp_KX


１１．Wait for a moment when your PC is searching TCP/IP port.

 

１２．Click "custom" and "control" button.

 

１３．Choose "LPR". Queue name is your user name when you login SIT PC.
Choose "Valid LPR byte count(B)" and click "OK".
*Student ID numbers must be entered in lower case. It cannot be printed.

手順13の画像（例に関してを追加）

 

１４．Click "Next".

 

１５．Click "Disk(H)" and click "reference(B)".

 

１６．Choose OMESETUP file from the folder when you expand downloaded file in No.５．Then click "Open(O)".

ファイル選択

File Location (64bit)

OEMSETUPの所在

*The location of the OEMSETUP file may vary depending on the driver version. If you are using a 32-bit OS, select the file in the 32-bit folder.


１７．Click "OK". 

 

１８．Choose "Kyocera TASKalfa 5052ci(J)KX" and click "Next(N)".

 

１９．Enter the name which is convinience for you in "printer name(P)". Click "Next(N)".

 

２０．Choose "Don't share this printer." and click "Next(N)".

 

２１．Click "Finish(F)".

 

２２．Choose Kyocera printer that has been created in the "Printers and Scanners".

 

２３．Choose "Printer Properties".

 

２４．Choose "contoel device" tag, and set options. 

■ means checked、□ means unchecked
■Paper feeder（cassette1，2）
■Paper feeder（cassette3，4）
□Large capcity feeder（cassette3，4）
□Side feeder（cassette5）
□Job separater
□Inner finisher
□1000 finisher
■4000 finisher ※□You can't choose 4000 finisher if you checked job separater.　
●2 hole（2）→「OK」Button
□mail box
■Folded unit
■Hard Disk

 

２５．Choose "ALL" tag and click "Print test page".Then click "OK".

 

 

２６．Check the print job here. 

*If your user name is displayed, the print job is correctly sent to the server.
*If your user name is in uppercase, you will not be able to print. If you have registered your user name in uppercase, please click here.
*Printing is possible only from the campus network. (0 SRAS5G,SRAS52G,SRAS-WPA,SRAS VPN,SITNET / ✖ eduroam)

 

２７．Go to Kyocera Printer　＞　Touch your IC card on the card reader of the printer　＞　Touch "Print " on the screen　＞　Touch "mono-chro" or  "color" button of the print job, and you can get the print.