質問集（FAQ）

①Click on the Global Protect icon on the screen.

※Click on the Global Protect icon in the screen. If the icon is not visible, display all hidden icons.
②When the Global Protect window appears, click the [≡] in the upper right corner and then click "Settings".
③When the Global Protect settings window appears, click on "Troubleshooting" and then click on "Collect Logs".
④Click on "Troubleshooting" and then click on "Collect Logs.

【Solution1】

The symptom may be improved by restarting your PC.

※Normally, when you open GlobalProtect, "Not connected" is displayed in bold in the center, but in rare cases it may be displayed as "Disconnected". At this time, there seems to be no response even if you click "Connect".
In most cases, restarting the PC will return to the "not connected" notation and the connection will be correct.

【Solution1】

If restarting does not improve the symptom, uninstall GlobalProtect and then install it again.
In that case, please go to the following manual URL and refer to the manual that matches the OS of your PC from the guide at the bottom of the page.

SRAS VPN

【The other solutions】

• I tried to connect to GlobalProtect, but instead of "Connected", "Connecting" and "Continuing" continue to appear (Mac OS)
• GlobalProtect indicates "Connection failed"

Open the window by clicking on the "Three Lines" and then on "Settings".

Make sure that "User" is correct. If you make a mistake, "sign out".
Make sure the Portal server name is correct. "Edit" or "Delete" if wrong and enter the correct server name.

Click Connect again.

username：ScombID（except "@sic"）
password：same in Scomb

【The other solutions】
・Cannot enter S*gsot because cannot connect to GlobalPlotect
・I tried to connect to GlobalProtect, but instead of "Connected", "Connecting" and "Continuing" continue to appear (Mac OS)

There is a possibility that the OS has disabled the GlobalProtect function or the set address is incorrect.
First,
Open "System Preferences" on your Mac and open "Security & Privacy" to display the screen of step 3 in the manual.
Select "Allow applications from App Store and trusted developers" and click the "Allow" button below it.
If you still cannot connect, the address may be incorrect, so once you uninstall → install, you can enter the server URL again.

There is a manual for each OS from the following URL> Guide> GlobalProtect.
https://web.sic.shibaura-it.ac.jp/SRAS_VPN

[Symptoms]
Why can't I connect to the Internet from my laptop even if Microsoft IE and Edge are connected by VPN only?
If you can't connect anything, try it.

[Solution]
① Access "Internet Options" (accessible from the search button in the start button on the lower left)

➡ “Internet Properties” pops up
② Click “Connect” on the tab
③ Click “SRAS VPN” in the box under “Dial-up and Virtual Private Network Settings”
④ Click “Settings”

➡ “Local Area Network (LAN) settings” pops up
⑤ Uncheck “Automatically detect settings” in “Automatic settings”
⑥ Adapt the changes and finish

Currently, the Center for Science Information does not have a guide for connecting to SRAS VPN on Linux.

To install GlobalProtect, please refer a guide by paloalto below.
https://docs.paloaltonetworks.com/globalprotect/5-1/globalprotect-app-user-guide/globalprotect-app-for-linux/download-and-install-the-globalprotect-app-for-linux.html

Also, please try to connect by referring to the guide for MacOS on how to use L2TP+IPSec connection.
The URL for the guide is attached below.
https://docs.sic.shibaura-it.ac.jp/www-tools/guide_vpn_mac_l2tp.pdf
※This is an on-campus network-only page, so SRAS-VPN connection is required.

GlobalProtect requires a connection procedure after installation.
Please check the manual below for more information.

SRAS VPN(GlobalProtect) Users guide for Mac OS

If you follow the above steps, you will be able to connect to SRASVPN through GlobalProtect.

The ShareFolder and MyVolume for each individual used in the class need to be connected to SRASVPN and then another connection process is required.

ShareFolder (Assignment Submission Folder) Connection Manual
URL:https://web.sic.shibaura-it.ac.jp/3554126bda3ed7e7df6a785c1552bee2/page_20190202024142

MyVolume Connection Manual
URL:https://web.sic.shibaura-it.ac.jp/3554126bda3ed7e7df6a785c1552bee2/page_20190704080248

We would be happy if you could confirm the above information.

It depends on the following two cases.

1. Case of using GrobalProtect

There is a limit to disconnect after 120 minutes from connection.

2. Case of using the VPN settings that we have been providing

There is no disconnection limit due to the passage of time.

For VPN connection methods, we have prepared manuals for each environment on the following pages, so please check it.
About SRAS VPN
https://web.sic.shibaura-it.ac.jp/SRAS_VPN

 In addition to SSTP, there is another way to connect to the campus network: Global Protect.

GlobalProtect's manual is available for off-campus use.

If you want to connect with L2TP+IPSec or SSTP, please refer to the manual

after connecting to the campus network with GlobalProtect.

SRAS VPN becomes the correspondence only for IPv4, but it is IPv4 and can be connected even if you use the v6 plus.

When a problem occurs, please invalidate IPv6 on a PC.

VPN is called "Virtual Private Network" and is a method of connecting to the campus network via the Internet.

For the VPN connection method, we have prepared a manual for each environment on the following page.
Plese refer to here and check if there are any mistakes in the operation.

About SRAS VPN
https://web.sic.shibaura-it.ac.jp/SRAS_VPN

From this year, we are introducing a new method called Global Protect.

About SRAS VPN（Virtual Private Network）.

If you are not using this, please try it.

 
If you are using a wireless LAN on Windows 10,
It has been reported that the network connection becomes unstable due to the power saving settings of Windows.
"Windows 10 wireless power saving settings"
Please search Google with keywords such as and consider changing the setting.

Also, it may become stable due to a reboot.

I suspect that the problem is that IPv6 is enabled.

From the following URL, after downloading "Disable IPv6 on non-tunnel interface (excluding loopback) and IPv6 tunnel interface", execute it, restart Windows, and then try again with VPN connection. Please try it.

https://support.microsoft.com/ja-jp/help/929852/how-to-disable-ipv6-or-its-components-in-windows

SRASVPNhelp-win10.pdf　Please refer to here.

There is a possibility that VPN is restricted on your network, or that the VPN regulation by the Chinese government has been strengthened and connection is not possible.
https://lb-hikaku.com/post-709/

You may be able to connect using the SIM roaming service of a telecommunications company in Japan. Some on-campus systems can be accessed without using a VPN.

If your OS is a Mac, there is a possibility that the OS has disabled the GlobalProtect function or the set address is incorrect.
Please follow the steps on the following pages.

I tried to connect to GlobalProtect, but instead of "Connected", "Connecting" and "Continuing" continue to appear (Mac OS)

If your OS is other than Mac, there is a possibility that the address is incorrect.
You can input the URL of the server again by uninstalling once and then installing.

SRAS VPN（Virtual Private Network）

You can connect to the university network via SRAS VPN from your home. For more detail, please read the “SRAS VPN (Virtual Private Network)” page and set up your computer (smartphone) referring to the manual in the guide column.

 When you use the VPN, you have to apply for SRAS VPN with AMI first (except connecting via GlobalProtect).

If you can't see a specific page even though you are connected, refer to "Cannot see S * gsot (Windows10)".

* AMI requires to access from the campus network.

Due to Windows Update, VPN can't connect in some cases.
Please delete your existing VPN connection settings and reconfigure them.

The following are the delete settings.

Windows Start menu　＞　settings　＞　Networks　＞　VPN

Then click on the corresponding VPN connection name and click "Delete".
Once the deletion is complete, set up the VPN again.

(Guide)
https://web.sic.shibaura-it.ac.jp/SRAS_VPN?lang=en